Facebook Icon Instagram Icon Youtube Icon LinkedIn Icon Tiktok Icon
You’re All Set,
Here’s What You’ll Need You’re All Set,
Here’s What You’ll Need You’re All Set,
Here’s What You’ll Need
YOUR VEHICLE
  • Make: NISSAN
  • Model: PATROL GR
  • Year: 11/88-06/97
  • Variant: 4.2 D All-wheel Drive (Y60GR) AWD, Diesel, 4.2L, 6Cyl, TD42, 85kW
  • Rego: 819CAT - NSW
  • VIN: Not provided
  • VID:
  • This install guide was generated on 3 July 2024.
  • This install guide is valid until 10th July 2024.
YOUR NEW
UNICLUTCH
Part No.
UC1024100
Do not use other models.
TORQUE
Approximately 110 percent more torque capacity than OEM.
ACTUATION
Lighter actuation effort than OEM. Pedal release may be higher.
Fitment Kit Note: Suits OE Flywheel | In this application, if the vehicle is not fitted with a dual mass flywheel, an increase in transmission noise could occur which will not have a negative impact on product function or service
 
TORQUE
Approximately 110 percent more torque capacity than OEM.
ACTUATION
Lighter actuation effort than OEM. Pedal release may be higher.
YOUR NEW
UNICLUTCH
Part No.
UC1024100
Do not use other models.
YOUR UNICLUTCH
FITMENT KIT
Part No.
UCFK10335-A-001
YOUR
FLYWHEEL
Part No. Reuse your existing OEM Spec Flywheel
RELEASE BEARING/CSC
GSB335
GSB335
SPIGOT BEARING/BUSH
RSB520
RSB520
Unless stated in the Fitment Kit Notes above, UniClutch suits OEM service parts. The above Release Bearing or CSC and Spigot Bearing or Bush are references from Clutch Industries Australia. Equivalent OEM spec parts may be used.
THIS DOCUMENT CONTAINS IMPORTANT INSTALLATION GUIDELINES WHICH MUST BE FOLLOWED TO ENSURE CORRECT FUNCTION AND PERFORMANCE OF YOUR NEW UNICLUTCH
ONLY VALID UNTIL  10th July 2024
This custom installation guide outlines the specifications and installation procedures for the stated vehicle. By using this product, you acknowledge that any deviations from the standard vehicle configuration or failure to follow the installation instructions precisely may impact the validity of the installation and could void the product warranty.
This install guide was acknowledged by the customer on 14 August 2025
INSTALL NOW
Product Registration & Generate My Personalised Installation Guide
UniClutch Logo
Facebook Icon Instagram Icon Youtube Icon LinkedIn Icon Tiktok Icon
Clutch Industries Head Office
136-138 Gaffney St
Coburg North VIC 3058 Australia
© Copyright 2026
Clutch Industries Pty Ltd.
All Rights Reserved
> FAQ
> Terms and Conditions
> What's New
> Privacy Policy
> Warranty Policy
> Login